How to Pave Your Driveway


You can design your driveway to accommodate cars, light-duty trucks, or campers. If you are considering paving your driveway, there are a few essential steps to take before starting the project. It is critical to have an adequately graded surface to avoid water ponding. You should prepare the area for paving with vegetation inhibitor and compact the gravel base to a depth of four to five inches. Ensure the gravel base extends beyond the driveway edges, as water causes cracks in asphalt driveways. Once the base course is in place, repeat the process until the surface is solid and smooth. Visit Website for more information.

Choosing the correct type of paving stone for your driveway is critical. You want the stone to complement the rest of the home’s exterior. The lighter the rock, the better, as darker stones can confuse the eye. A lighter-colored stone acts as an accent color, giving your home a cohesive and beautiful appearance. Make sure to select pavers that are not too dark, as this will be the main focal point of the driveway.

When planning a new driveway, you should consider the site’s subgrade. The subgrade’s compaction level is critical to the overall structure of the pavement. If it is too soft, you should replace it with a more compacted one. You should also check the existing subgrade soil for its load-supporting properties. If it is not, you may want to install stabilization fabric. Otherwise, the driveway will sink. Ensure that the driveway is located away from a growing root system.

Besides the color, you should also consider the material that your driveway is made of. Asphalt is easier to repair than concrete because it blends with its existing finish. While concrete may look good for years, it may need repairs more frequently. For smaller repairs, homeowners can perform cold patches themselves. However, concrete repairs are much more difficult. Oftentimes, it is possible to patch asphalt surfaces yourself. You can also apply a sealant to your concrete driveway.

When pave your driveway, keep in mind that temperature shifts play a role in the overall cost. As the temperature changes, the pavement expands and contracts. Cold weather can cause significant cracks to form, and a stiff slab will result. While minor expansion and contraction are not detrimental to the durability of your driveway, significant temperature shifts can significantly damage the pavement. It is important to plan accordingly and consult a professional contractor if your driveway has significant cracks or other issues.

The cost of driveway installations depends on the square footage of the site. The cost per square foot of your driveway is influenced by the type of material used, the amount of time it will last, and whether you plan to use it often. Other costs may apply if you need to make major changes in the landscape, such as adding drainage systems or excavating. However, most driveways cost an average of $1200 for installation. It is worth noting that the cost per square foot is dependent on the material you choose, and a little research can go a long way in making an informed decision.

Aprons and parking areas are typically four to six feet wide, depending on the size of the drive. The width of the apron should be at least six feet. In addition, an apron should have a minimum radius of six feet to avoid traffic. If you are considering paving a parking space, make sure the apron is the right width and is wide enough to accommodate all vehicles. You should also plan on installing a ring curb to protect the curb from damage.

If you are looking for a driveway that is more durable than asphalt, consider installing concrete. Asphalt is the least environmentally friendly material, and it does not last very long. The material is susceptible to heat and should be cleaned regularly. It is also not recommended for areas where heavy trucks regularly park. Concrete is robust and can last up to 40 years, although it will crack over time, making it difficult to hide repairs. A concrete driveway can also be expensive to install, maintain, and repair.

Unlike asphalt paving, chip sealed driveways will not be smooth like other paved driveways, but they are affordable. Chip sealed driveways start with a gravel base. A hot tar mixture is then poured on the gravel. Then, stones are pressed into the tar with roller equipment. This method requires less maintenance and can be a more cost-effective option. If you do not mind chipped surfaces, chip sealed driveways are an excellent alternative.